Metallic Epoxy Flooring Residential Bohemia, NY

A Floor That Stops People in Their Tracks

Metallic epoxy flooring turns ordinary residential concrete into a seamless, one-of-a-kind surface that looks custom — because it is. No two floors are alike, and yours won’t be either.

35 Years of Installations

We’ve been installing floors since 1990 — long enough to know exactly what fails and why, and how to make sure yours doesn’t.

Sherwin-Williams Certified Installers

We hold Sherwin-Williams High Performance Flooring certification — factory-level training in advanced resinous systems that most local contractors simply don’t have.

BBB Accredited, A+ Rated

Our BBB file goes back to 1991. That kind of track record doesn’t happen by accident — it’s built one job at a time, over decades.

Custom Home Epoxy Floors, Bohemia NY

This Is What Your Concrete Could Look Like

Metallic epoxy flooring is a multi-layer resinous system that uses metallic pigments to create a three-dimensional, flowing finish — think marbled swirls, ocean waves, or a molten lava effect, depending on the color palette and technique. No two floors come out the same. It’s a popular choice for garages, basements, mudrooms, home gyms, and entertainment spaces across Long Island. Homeowners in Bohemia and the surrounding Islip area are increasingly choosing metallic epoxy over tile, painted concrete, or standard coatings because the visual impact is immediate and the durability holds up through real life — road salt, humidity, heavy foot traffic, and all. If you’ve been living with stained concrete, a damp basement that never gets used, or a garage floor that looks like it’s been through a decade of hard winters, this is worth a closer look.

Luxury Residential Floor Coatings That Last

What You Actually Get With This Floor

Beyond the visual upgrade, metallic epoxy changes how you use and feel about the space — for years, not months.

Your garage floor handles road salt, oil, and winter grime without staining or deteriorating season after season.

Your basement becomes a usable room — not a space you avoid because the floor looks raw and feels damp.

Spills, dust, and tracked-in debris wipe up in seconds because the seamless surface has nowhere for dirt to hide.

The floor holds its color and finish for years because the UV-resistant topcoat prevents yellowing, even in sun-exposed garages.

Every floor we install is completely unique — the design you end up with exists nowhere else, in any other home.

When it’s time to sell, a finished basement or showroom-quality garage floor photographs well and makes a strong first impression on buyers.

Designer Metallic Basement Floors, Long Island

Why Most Epoxy Floors Fail — And Ours Don't

The floors you’ve seen peel, bubble, or yellow within a couple of years almost always failed for the same reasons: moisture wasn’t tested, the concrete wasn’t properly prepared, or the materials weren’t up to the job. Those aren’t installation mistakes — they’re skipped steps. We use diamond grinding on every project. That means we mechanically open the concrete’s pores so the epoxy bonds chemically, not just sits on top. It’s the difference between a floor that lasts two years and one that lasts twenty. Most DIY kits and budget contractors skip this entirely because it takes equipment and time. We also test for moisture before anything goes down. On Long Island, this is non-negotiable. The coastal environment and high water table in many parts of Suffolk County mean concrete slabs — especially in basements — are constantly dealing with moisture vapor from below. If that’s not addressed before installation, the floor will fail. We’ve been working in this environment for over three decades, and moisture assessment is a conversation we have with every customer before we quote a single square foot.

Metallic Epoxy Installation Process, Bohemia NY

What Goes Into a Floor Built to Last

Our metallic epoxy system isn’t a single coat. It’s a layered build — each stage serving a specific purpose. We start with a penetrating primer that gets deep into the concrete and creates a solid foundation for everything above it. From there, we apply a 100% solids epoxy base coat with the metallic pigment worked in. This is where the design takes shape. Using specialized tools and technique, we manipulate the metallic layer to create the flowing, three-dimensional pattern that makes each floor unique. The final layer is a clear urethane topcoat — UV resistant, chemical resistant, and tough enough to handle whatever your household puts it through. We don’t rush the cure between coats. Each layer gets the time it needs to bond correctly, because cutting that time short is another reason floors fail early. The whole process typically wraps up in a matter of days, and you’ll be back on the floor within 24 to 72 hours depending on the system. Clean, efficient, and done right the first time.

Residential Epoxy Floor Installation Steps

From Bare Concrete to Finished Floor

Concrete Assessment and Moisture Testing

We inspect your slab, test for moisture, and identify any cracks or issues before a single product is applied.

Surface Prep and Crack Repair

Diamond grinding opens the concrete for a true chemical bond. Cracks and pits are repaired so the surface is ready to hold the system properly.

Layered Application and Topcoat

Primer, metallic epoxy base, and a UV-resistant urethane topcoat are applied in sequence — each layer cured before the next goes down.